Drivers Etek Labs Port Devices

USB driver for laboratory balances. To use LabX, LabX Direct, MCLink, MT-SICS or PC Direct via USB the driver needs to be installed before you connect the balance with the PC. The driver creates a separate COM port which allows the communication with the balance. Hardware IDs USB VID056C or USB vendor ID (VID) 056C recognizes eTEK Labs as the USB vendor and manufacturer of the device or devices listed below. USB Vendor ID (VID), Device ID (PID) and SUBSYS ID are used to recognize the manufacturer and model of a devices. Open the Device Manager by right clicking 'My computer' and selecting control panel. Look under Ports (COM & LPT). You should see an open port named 'USB Serial Port' Right click on the 'USB Serial Port' and choose the 'Update Driver Software' option. Next, choose the 'Browse my computer for Driver software' option. Many of the Avnet evaluation boards are equipped with the Silicon Labs CP2102 or CP2104 USB-to-UART Bridge ICs. This connects a PC's USB port to the evaluation board and looks like a UART to the PC. A virtual COM port will be created on the PC by means of a Silicon Labs CP210x USB-to-UART bridge driver. If the problem persists after you rebooted your computer, then there is a chance that the issue is related to out-of-date drivers or a possible conflict between two connected USB devices.

• Drivers Etek Labs Port Devices Download

Hardware - Install a Printer as a Local Port Device

Applies to: Windows 10, 8.1, 8, 7, Vista and XP

How do I install a printer as a Local Port device?
Solution:
Use the instructions below to install the printer using a Local Port on the given operating system.
NOTE: These instructions assume the following:

• The printer is already shared from the computer that is hosting it. See How to Share a Printer- FAQ 38545 for more information.
• That you have downloaded the proper drivers for the printer model you are installing.
• That you are able to access the shared resources on that computer without being prompted for login credentials. If you cannot access the hosting PC without providing credentials, correct that issue before proceeding.
• You have ensured the printer is shared and security is set to Everyone with Full Control.

If these steps have not been performed, please do so before attempting installation of a Local Port device. Failure to do so will result in failure errors when trying to create the port.
Click the + or the header to expand the section.

To install a printer locally on Windows 10, follow these steps:

1. Right-click on the Windows logo in the bottom left of the screen. Select Search.
   
2. Search for Control Panel. Select it from the search results.
   
3. Find Devices and Printers in the Control Panel and open it.
   
4. Click Add a Printer (on the top).
   
5. A window will come up that is searching for printers on the network. Click Stop, then click The printer I want isn't listed.
   
   
6. Click Add a local printer or network printer with manual settings. Click Next.
   
   
7. Click Create a new port. Select Local Port for Type of port.
   
8. In the Port Name box, type the path to the printer in the following format, where server is the name of the print server and printer is the share name of the printer (e.g. serverprinter). Click OK.
   
9. Select the printer model and driver. Click Next. If the exact model isn't listed, click Have Disk and browse to the location where you earlier extracted the drivers.
   
10. Follow the rest of the wizard. When prompted to share the printer, select Do not share this printer.
    NOTE: Printers should only be shared from ONE computer, preferably the computer it is connected to via USB.

To install a printer locally on Windows 8.1, follow these steps:

1. Right-click on the Windows logo in the bottom left of the screen. Select Control Panel.
2. Find Devices and Printers in the Control Panel and open it.
3. Click Add a Printer (on the top).
4. A window will come up that is searching for printers on the network. Click Stop, then click The printer I want isn't listed.
5. Click Add a local printer or network printer with manual settings. Click Next.
6. Click Create a new port. Select Local Port for Type of port.
7. In the Port Name box, type the path to the printer in the following format, where server is the name of the print server and printer is the share name of the printer (e.g. serverprinter). Click OK.
8. Select the printer model and driver. Click Next. If the exact model isn't listed, click Have Disk and browse to the location where you earlier extracted the drivers.
9. Follow the rest of the wizard. When prompted to share the printer, select Do not share this printer.
   NOTE: Printers should only be shared from ONE computer, preferably the computer it is connected to via USB.

To install a printer locally on Windows 8, follow these steps:

Acer (Notebooks, Tablets, Desktops) Any Windows 10 drivers by Acer, for your Acer computer, are.

Free my demy software download software at UpdateStar - 1,746,000 recognized programs - 5,228,000 known versions - Software News. A Windows version has been available since the introduction of iTunes 7. More Canon My Printer 3.3. Realtek Ethernet Controller Driver 10.45.928.2020. Make sure your printer is on and connected to your PC. Open Start Settings Devices Printers & scanners.Select the name of the printer, and then choose Remove device. To reinstall the printer, select Add a printer or scanner and then select the name of the printer you want to add. If Windows doesn't automatically find a new driver after the printer is added, look for one on the device. Driver updates for Windows 10, along with many devices, such as network adapters, monitors, printers, and video cards, are automatically downloaded and installed through Windows Update. You probably already have the most recent drivers, but if you'd like to manually update or reinstall a driver, here's how: Update the device driver.

1. Move your mouse to the lower-right to bring up the Charms bar, or press Windows key + C.
2. Click on the Settings gear, then click Control Panel.
3. In Control Panel, open Devices and Printers.
4. Click Add a Printer (on the top).
5. A window will come up that is searching for printers on the network. Click Stop, then click The printer I want isn't listed.
6. Click Add a local printer or network printer with manual settings. Click Next.
7. Click Create a new port. Select Local Port for Type of port.
8. In the Port Name box, type the path to the printer in the following format, where server is the name of the print server and printer is the share name of the printer (e.g. serverprinter). Click OK.
9. Select the printer model and driver. Click Next. If the exact model isn't listed, click Have Disk and browse to the location where you earlier extracted the drivers.
10. Follow the rest of the wizard. When prompted to share the printer, select Do not share this printer.
    NOTE: Printers should only be shared from ONE computer, preferably the computer it is connected to via USB.

To install a printer locally on Windows Vista and 7, follow these steps: Free driver detective download.

1. Click Start | Devices and Printers.
2. Click Add a Printer (on the top).
3. Select Add a local printer.
4. Select Create a new port. Select Local Port for the Port Type. Click Next.
5. In the Port Name box, type the path to the printer in the following format, where server is the name of the print server and printer is the share name of the printer (e.g. serverprinter). Click OK
6. Select the printer model and driver. Click Next. If the exact model isn't listed, click Have Disk and browse to the location where you earlier extracted the drivers.
7. Follow the rest of the wizard. When prompted to share the printer, select Do not share this printer.
   NOTE: Printers should only be shared from ONE computer, preferably the computer it is connected to via USB.

Free my demy software download software at UpdateStar - 1,746,000 recognized programs - 5,228,000 known versions - Software News. A Windows version has been available since the introduction of iTunes 7. More Canon My Printer 3.3. Realtek Ethernet Controller Driver 10.45.928.2020. Make sure your printer is on and connected to your PC. Open Start Settings Devices Printers & scanners.Select the name of the printer, and then choose Remove device. To reinstall the printer, select Add a printer or scanner and then select the name of the printer you want to add. If Windows doesn't automatically find a new driver after the printer is added, look for one on the device. Driver updates for Windows 10, along with many devices, such as network adapters, monitors, printers, and video cards, are automatically downloaded and installed through Windows Update. You probably already have the most recent drivers, but if you'd like to manually update or reinstall a driver, here's how: Update the device driver.

1. Move your mouse to the lower-right to bring up the Charms bar, or press Windows key + C.
2. Click on the Settings gear, then click Control Panel.
3. In Control Panel, open Devices and Printers.
4. Click Add a Printer (on the top).
5. A window will come up that is searching for printers on the network. Click Stop, then click The printer I want isn't listed.
6. Click Add a local printer or network printer with manual settings. Click Next.
7. Click Create a new port. Select Local Port for Type of port.
8. In the Port Name box, type the path to the printer in the following format, where server is the name of the print server and printer is the share name of the printer (e.g. serverprinter). Click OK.
9. Select the printer model and driver. Click Next. If the exact model isn't listed, click Have Disk and browse to the location where you earlier extracted the drivers.
10. Follow the rest of the wizard. When prompted to share the printer, select Do not share this printer.
    NOTE: Printers should only be shared from ONE computer, preferably the computer it is connected to via USB.

To install a printer locally on Windows Vista and 7, follow these steps: Free driver detective download.

1. Click Start | Devices and Printers.
2. Click Add a Printer (on the top).
3. Select Add a local printer.
4. Select Create a new port. Select Local Port for the Port Type. Click Next.
5. In the Port Name box, type the path to the printer in the following format, where server is the name of the print server and printer is the share name of the printer (e.g. serverprinter). Click OK
6. Select the printer model and driver. Click Next. If the exact model isn't listed, click Have Disk and browse to the location where you earlier extracted the drivers.
7. Follow the rest of the wizard. When prompted to share the printer, select Do not share this printer.
   NOTE: Printers should only be shared from ONE computer, preferably the computer it is connected to via USB.

To install a printer locally on a Windows XP-based computer, follow these steps:

1. Go to Start |Control Panel |Printers and Other Hardware |Printers and Faxes.
2. Double-click Add Printer to start the Add Printer Wizard. Click Next.
3. Click Local printer. Clear the Automatically detect and install check box. Click Next.
4. Click Create a new port. Click Local Port in the Port type section.
5. In the Port Name box, type the path to the printer in the following format, where server is the name of the print server and printer is the share name of the printer: serverprinter.
6. Click Next. Select the driver for your printer. If the driver is not listed, click Have Disk and browse to the location where you earlier extracted the drivers.
7. Click Next, and then follow the instructions to finish the wizard. When prompted to share the printer, select Do not share this printer.
   NOTE: Printers should only be shared from ONE computer, preferably the computer it is connected to via USB.

Drivers Etek Labs Port Devices Download

Printed copies of this document are considered uncontrolled.
21672.Rev006 01.06.2021